| INDICATION: For use with some newer vehicles with computer monitored bulb-out indicators. With installation of a 35w HID kit or any HID kit using an integrated harness. The result is a drop in system load triggering an dash board error light, a constant on/off condition, or a failure to ignite properly. HOW TO USE: Depending on the vehicle system, one or two resistors may be required on one or both sides. Resistors only need to be installed between (+) trigger and (-) ground for the particular beam presenting the error. For instance, if the low beams work fine in a bixenon system, but the highs exhibit the error, resistors only need to be installed between the high beam trigger and ground. CAUTIONS: Resistors when in use will become hot. Do not handle before giving ample time to cool off. It is recommended to install resistors directly to metal frame of vehicle for use as a heat sink and mount away from any plastics. Each order Includes:
- 1x 50w 6 ohm wirewound resistor in aluminum frame
- 1yr warranty | 
